The Titan Aero 7500 brake actuator, part # T63FR, has a 2-inch ball and fits a 3 inch wide channel tongue. It has a weight capacity of 7,500 lbs.
In a straight bolt-on coupler with a 2 inch ball that fits a 3 inch wide channel, the coupler with the highest weight capacity would be the Titan Leverlock Coupler - Adjustable Ball, part # T4845000. This coupler will only have a weight capacity of 5,000 lbs, which is lower than the 7,500-lb capacity on the Titan Aero 7500 brake actuator.
The... view full answer...
We have three straight-tongue trailer couplers like # CT-2002-Z that will fit a 2-inch ball and mount on a 2-1/2-inch wide channel tongue. All of these are rated for 3500-lbs and can be seen on the linked page.
If you need to drill a hole in either the trailer tongue (to match the coupler) or in the new coupler (to match the hole in the trailer tongue) it is kind of a toss up since the home-built trailer has no warranty from a manufacturer. But since the coupler is a fairly inexpensive... view full answer...
If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler # BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available.
You may be able to use a channel bracket like # BDAC3000300, weld it to the end of the tongue, and then use coupler # BDA200C0317. view full answer...
We do not offer parts for Reliable brand brake actuators but we can help you with selecting a new one if you cannot source the part(s) you need elsewhere.
The page I linked for you displays all 6K-rated surge couplers. We have both drum brake and disc brake models with the different psi pressures required for each type of braking system. Just click on the type of brakes you have, the ball size required, your preferred installation method - weld-on or bolt-on and the trailer frame style,... view full answer...
The largest channel width channel or straight tongue coupler we currently offer is 3 inches. I included a link for you as well.
What you could do is go with a channel coupler # PSA256S0303 and then weld on a channel bracket # BDAC5000300. I recommend using a professional welder too.
I added a video review about the channel coupler # PSA256S0303 and link to all the channel couplers we currently offer. view full answer...
It sounds like you need a bolt-on 1-7/8-inch coupler for a trailer with a channel tongue. The couplers like this that we offer are shown on the linked page. These are available as both standard couplers and brake actuator couplers. Just click on the type you need.
For instance, part # CT-2003-Z is a 2K-rated 1-7/8-inch trigger latch coupler for a 3-inch tongue. These mounting holes are spaced apart 2-1/4-inches on center. Please see the linked video.
These items are made to fit channel... view full answer...
The Demco Channel Tongue Trailer Coupler W/ EZ-Latch # DM13689-52 you were looking at uses 1/2" mounting hardware so you will need to pick up three 1/2" grade 8 bolts, six grade 8 washers, and three grade 8 lock nuts to secure this to your 3" wide pole tongue.
I included a video review of the # DM13689-52 for you to take a look at. view full answer...
We do offer a number of different fold-away couplers for various sizes of straight trailer tongues but these are intended only for use on steel trailer frames. Aluminum trailers, for all their good non-corrosive and lightweight nature, are simply not strong enough to allow the attachment of a hinged tongue mechanism like # FHDPB330301 and the others shown on the linked page.
You can make absolutely sure by contacting Shorelander with your trailer's VIN number. As the maker of your trailer... view full answer...
Our range of bolt-on 6K-rated straight-tongue surge couplers for a 2-inch ball is linked for you. These are offered with an electric lockout or no lockout, but not with a manual type. The page displays both disc and drum type options; click on which you need at the top of the page.
We do have two options in a 7.5K-rated coupler for drum brakes that DO have a manual lockout; these are Titan products # T4839000 and # T63FR. view full answer...
We do have a variety of straight tongue couplers that fit with a 2-5/16" hitch ball like what you're looking for.
We have standard couplers like the Demco # DM13203-95 as well as hydraulic actuator couplers like the Demco # DM8101801.
I'm attaching review videos of the couplers as well as a link to our selection of couplers that fit with a 2-5/16" hitch ball. If you can give me more details about what exactly you're needing I can make a specific recommendation for you. view full answer...
Since Valley went out of business the replacement parts are no longer being made. From the research that I have done it looks like the Coupler Repair Kit for 2" Curt Couplers # C25194 would be the best fit for a repair kit.
What I recommend doing is replacing your coupler completely. Replacement parts for Valley equipment are becoming harder to come by since they do not make them anymore so it would benefit you to get a coupler that is currently being manufactured.
I have linked our... view full answer...
We do not have a master cylinder repair kit for your older Atwood surge coupler but we can help you select a new coupler to match your trailer gross weight. The linked page displays both disc and drum brake surge couplers; just click on the type you need for your trailer, the ball size and then click on the gross trailer weight rating (GTW) that is appropriate.
A popular option for a 7K GTW with a straight tongue and drum brakes is Demco drum actuator coupler # DM72VR which is a bolt-on... view full answer...
Yes, you can use Titan Zinc-Plated Brake Actuator # T4750820 which is straight rather than having a drop coupler. Everything else is the same: fits a 3 inch wide tongue, fits a 2-5/16 inch ball, rated for 12,500 pounds, disc brake applications. view full answer...
We have a few different round tube mount couplers that might work for you. If the tube has a 1-3/4 inch diameter we have 4 options:
# BD028381 is rated for 7,000 pounds and fits a 2 inch ball
# BD028242 is rated for 5,000 pounds and fits a 2 inch ball
# BD028442 is rated for 12,500 pounds and fits a 2-5/16 inch ball
# BD028461 is rated for 12,500 pounds, fits a 2-5/16 inch ball, and has a high-profile latch
And we have one option if the tube is 3-1/2 inches in diameter. It is # BD028383... view full answer...
Unfortunately some years back Atwood was bought out and replacement parts have been discontinued so we cannot help you with a replacement master cylinder number 85739, but we can help you with a new surge coupler to replace yours.
I linked our main page for surge couplers and we have both disc and drum types; these operate at different pressures so be sure to choose the right type for your braking system. First click on the type you need and then select the specific attributes you want... view full answer...
We do offer two disc brake surge coupler/actuators that will fit a standard 50-degree a-frame trailer. Both of these actuators come from Demco.
Actuator # DM8105422 is primed red and intended for weld-on installation. It includes a breakaway and an electric reverse lockout feature that can be activated by the tow vehicle's reverse light circuit to allow you to back up the trailer with engaging the brakes. This unit has a tongue weight rating of 1250-lbs and a gross towing weight rating... view full answer...
While we don't have a trailer tongue extender that folds in like the one you are referring to, there are a couple options that may suit your needs.
You could potentially use a fold-away coupler adapter such as Fulton Fold-Away Coupler Hinge Kit # FHDPW230300. This is designed to be added in between the trailer frame and the coupler so that the tongue can fold in for easy storage. You could technically install this, then use a longer coupler to extend the tongue. Keep in mind, trailer manufacturers... view full answer...
We do have some Lock N Roll off-road couplers that bolt to the trailer frame as the ARK Articulating Off-Road Coupler # AR44FR is the only one we currently carry from ARK.
Lock N Roll Articulating 2" Channel Tongue Trailer Coupler # 336TS528
Lock N Roll Articulating 2-1/2" Channel Tongue Trailer Coupler # 336TS506
Lock N Roll Articulating 3" Channel Tongue Trailer Coupler # 336TS508
You will need the Lock N Roll Articulating Hitch w/ 3-Position Channel # 336VS503505 as it does not use... view full answer...
We do have a fold away coupler that will work on your trailer tongue that is 2 inches by 3 inches and that is the Fulton # FHDPB230101. This coupler will install on your trailer tongue and has a cacity of up to 5,000 pounds. Please note that the tongue material thickness must be between 0.188 and 0.120 inches for installation purposes.
The fold away coupler that you referenced # FHDPW330300 is intended for use on trailer tongues that are 3 inches by 3 inches and I would not recommend... view full answer...
We do have a Bolt-On Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 and Weld-On Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 that will fit your 3" X 3" trailer tongue. view full answer...
Go To Results